专注通风管道加工·排烟罩

  　山东通风管道加工按材质分： 一般有：钢板风管(普通钢板)、镀锌板(白铁)风管、不锈钢通风管、玻璃钢通风管、塑料通风管、复合材料通风管、彩钢夹心保温板通风管、涂胶布通风管(如矿用风筒)、矿用塑料通风管等，近出现了一种新型管道，使其作用更加多样化。

　　Ventilation pipe material: General: steel duct (steel), galvanized plate (Bai Tie) wind pipe, stainless steel pipe, glass steel ventilation ventilation pipe, plastic pipe, composite pipe ventilation ventilation, ventilation pipe, sandwich insulation board rubberized cloth ventilation tube (such as mine, mine ventilation duct) plastic pipe so, the recent emergence of a new pipeline, making it more diversified.

　　1、 风管加工过程会产生粉尘或纤维飞扬，现场切割风管人员必须佩戴专用的防尘眼罩及口罩操作，防止切割时产生的粉尘吸入体内。

　　1, the wind pipe processing process will produce dust or fiber flying, on-site cutting wind pipe personnel must wear special dust goggles and mask operation, to prevent cutting dust generated by inhalation.

　　2、当风道与除尘设备、加热设备等衔接前，应待设备装置终了后，按理论测绘的图纸中止预制和装置。

　　2, when the air duct and dust removal equipment, heating equipment, etc., before the equipment should be completed, according to the drawings of theoretical drawings to stop the prefabrication and installation.

　　3、当天施工结束后的剩余材料及工具应及时入库，不许随意放置。

　　3. The remaining materials and tools after the day's construction shall be put in storage in time, and shall not be allowed to be placed at will.

　　4、济南通风管道装置时，进、出风日宜在风道预制时开出洞口，如需在装置终了的风道上现开风口，其接口处应紧密。

　　4, Ji'nan ventilation pipeline device, in and out of the open hole in the air duct should be prefabricated, such as in the end of the air duct device on open air, the interface should be close.

　　5、风管加工中使用的氧化镁，氯化镁应妥善存放，注意防火且不得直接在阳光下曝晒。失效的氧化镁，氯化镁及原料包装容器不得随意抛弃或燃烧，应集中堆放处理。

　　5. The Magnesium Oxide and magnesium chloride used in the processing of air duct should be stored properly, and attention shall be paid to fire prevention and shall not be exposed directly to the sun. Failure of Magnesium Oxide, magnesium chloride and raw materials packaging containers shall not be discarded or burned at random, should be concentrated stacking treatment.

　　6、当运送含凝结水或含湿量较大的气体时，其水平管道宜设有坡度，并在低点处接排水管。装置时风道底部不宜呈现纵向接缝，对底部有接缝处应中止密封处置。

　　6, when carrying water containing condensate or more humid gas, the horizontal pipe should be equipped with a slope, and at the low point to connect the drain pipe. When installing, the bottom of the air duct shall not be longitudinal joint, and the sealing joint shall be stopped at the seam at the bottom.

　　6、施工时需要照明亮度大和噪声大的工作尽量安排在白天进行，减少夜间施工照明电能的消耗和对周围居民的影响。

　　6, the construction needs illumination, brightness and noise work, as far as possible in the daytime arrangements, to reduce the night construction, lighting, electricity consumption and the impact on the surrounding residents.

　　7、现场制作通风管道时，在切割平台1～2 米处设置专用风扇或风机，将切割时产生的粉尘吹向通风相对良好的开阔区域，减少粉尘被制作人员的吸入及对视线的影响。

　　The ventilation pipe 7, making the scene, in the cutting platform 1 ~ 2 meters set up a dedicated fan or blower, dust will be generated during the cutting blow to the open area relatively good ventilation, reduce dust by inhalation of production staff and the impact on the line of sight.

　　本文的精彩内容来自山东通风管道加工详细内容请点击我们的网站:/谢谢您的到来!

　　The highlights of this article are from the Shandong ventilation pipe processing details, please click on our official website: /, thank you for coming!

上一篇：空调风机盘管清洁的优点
下一篇：风管穿越沉降缝时的注意事项