专注通风管道加工·排烟罩

　　1、 油烟吸收率应大于95%,采用同诳导流围护安装。

　　1, oil absorption rate should be greater than 95%, using the same use enclosure installation guide.

　　2、风罩嵌入吊顶内,两者之间设有不锈钢装饰板,用厚度1.2㎜的不锈钢板制造,易拆卸,嵌入深度≥100㎜。

　　2, the wind cover embedded in the ceiling, stainless steel decorative plate is arranged between the two, manufacture, easy disassembly of stainless steel plate thickness of 1.2 mm, 100 mm above the embedded depth.

　　3、排烟罩清洗：我们把箅子(过滤网)取下放入专用容器中，加入金属清洗剂浸泡，然后用高压水枪冲洗干净;烟罩表面的油污用清洗剂再使高压水枪冲洗，然后清洗灶台、墙面、烟罩上光亮剂、地面清洁。

　　3, hood cleaning: we put off the grate (filter) into special containers, adding metal detergent soak, then rinse with water cannons; hood surface oil cleaning agent for the first high-pressure water washing, then clean the stove, metope, hood, floor cleaning brightener.

　　5、围护构造应配有铰接式检查门,以便于卫生清洁及察看。

　　5 the enclosure structure shall be equipped with hinged inspection doors for sanitary cleaning and inspection.

　　6、烟道清洗：大管道采用人工进入的方法彻底清洗。

　　6, flue cleaning: large pipes using artificial approach to clean thoroughly.

　　7、设备全部由不锈钢制成,一切联合处为防水、防蒸汽、防油烟。

　　7. The equipment is made of stainless steel, and all joints are waterproof, steam proof and smoke proof.

　　8、全部罩体用厚度大于1.0㎜的不锈钢板制造.

　　8, all stainless steel cover plate with thickness greater than 1 mm.

　　9、油烟净化器清洗：由经验丰富的人员操作，使用除油剂浸泡。

　　9, soot purifier cleaning: experienced professionals operate, use highly effective degreasing agent immersion.

　　10、通风管用1.0镀锌板制成，设有不锈钢铁风量调理阀。

　　10. The ventilation pipe is made of 1 galvanized steel plate. It is equipped with stainless steel air conditioning valve.

　　11、照明设备是防溅,防水、内凹型的,散布于每1000㎜间隔，并应将一切电线套于导管中，用接驳箱衔接。照度安装大于等于600lux,采用芝光管灯,统一的电力接口。

　　11, the lighting equipment is splash proof, waterproof, concave, scattered in every 1000 mm intervals, and should be set on all wire conduit, connection with connection box. The installation intensity greater than or equal to 600lux, the use of energy-saving Chicago neon lights, power unified interface.

　　12、 风罩竖板带有一体环绕的自排安装,排放槽易于清洗油烟、蒸汽,排放管为不锈钢制,并联风罩的全自动自清洁安装。

　　Since the row, installation of 12 wind shield risers with integrated surround, discharge groove is easy to clean lampblack, steam discharge pipe, stainless steel, parallel to the wind hood automatic self cleaning installation.

　　本文的精彩内容来自济南排烟罩详细内容请点击我们的网站: /谢谢您的到来!

　　The exciting content of this article comes from the smoke hood of Ji'nan. Please click on our official website: /, thank you for coming!

上一篇：风管穿越沉降缝时的注意事项
下一篇：单烟道式通风管道加工原理