通风管道铺装明晰装、暗埋，一般选用明装。由于明装便于于维修，在没法选用明装时考虑到暗埋方法，管道尽量的集中化陈列，尽可能沿墙或柱头平行面铺装，若管经大或隔热保温应合理布局在贴墙侧。一般二根管道平行面合理布局时，间隔不小于100～200mm。
The ventilation pipe is clearly installed and buried, and the open installation is generally selected. As the open installation is convenient for maintenance, when it is impossible to select the open installation, the buried method should be considered. The pipelines should be displayed in a centralized way as far as possible, and paved along the parallel surface of the wall or column head as far as possible. If the pipe diameter is large or the heat insulation should be reasonably arranged on the wall side. Generally, when the parallel planes of two pipes are reasonably arranged, the interval shall not be less than 100-200 mm.
通风管道系统软件的联接标准
Connection standard of ventilation duct system software
在以电焊焊接为关键接口方式方式的管道中，应设定充足总数的法兰联接，在以外螺纹为主导的联接管道中应设定充足的活接头，通风管道便于宜在安裝、拆装、维修。
In the pipeline with electric welding as the key interface mode, sufficient number of flange connection shall be set. In the pipeline with external thread as the main connection mode, sufficient movable joints shall be set. The ventilation pipeline shall be convenient for installation, disassembly and maintenance.
通风管道安裝加工系统软件的支撑点标准管道不适合与各种阀门立即支撑点在机器设备上，应独立设定支撑架或支架，管道的焊接部位应在工程施工便捷或承受力较小的地区，焊接不可坐落于支撑架处且间距不小于200mm。
The standard pipe is not suitable for the immediate support point of various valves. The support frame or bracket should be set independently on the machinery and equipment. The welding position of the pipe should be in the area with convenient engineering construction or low bearing capacity. The welding should not be located at the support frame and the spacing should not be less than 200 mm.
不一样烟尘汽体特性不一样，则清洁的按段解决应不一样。通风管道加工系统软件合理布局时要确保总体系统软件的漏损小，保证 除尘口的有充足的排风量。通风管道加工系统软件合理布局要减少摩擦阻力。
If the steam characteristics of different soot are different, the cleaning methods should be different. When the software layout of the ventilation pipe processing system is reasonable, it is necessary to ensure that the leakage of the overall system software is small, and that there is sufficient exhaust air volume at the dust outlet. The reasonable layout of the software of the ventilation pipe processing system should reduce the friction resistance.
济南通风管道加工
Jinan ventilation pipe processing
环形风管抗压强度大耗品少，但加工加工工艺繁杂些，占有室内空间大；不锈钢风管易布局，非常容易加工，因此应用比较广泛。济南通风管道加工也有系机械自动化生产制造由尼龙带螺旋式线圈电感而成，有环形、矩形框，为节约室内空间，很多的不锈钢风管制成扁圆。
The annular air duct has high compressive strength and few consumables, but the processing technology is more complicated and occupies a large indoor space; the stainless steel air duct is easy to layout and process, so it is widely used. Jinan ventilation pipe processing also has mechanical automation production, which is made of nylon belt spiral coil inductor, with ring and rectangular frame. In order to save indoor space, many stainless steel air pipes are made into flat circle.
上一篇：济南排烟管道破损时怎么办？如何解决
下一篇：通风管道系统的设计计算步骤
