对于餐饮业的厨房来说，排气是否顺畅与厨房能否正常工作直接相关。烟气的净化仅是净化厨房排气系统中的空气的强制性功能。排气系统和净化器的合理匹配是确保烟尘净化器净化效率的关键，也是一个容易忽视烟尘净化器设计的问题。如果排气系统的设计不合理，整个厨房都不会耗尽。即使安装了油烟净化器，烟雾也无法安装油烟净化器。
For the kitchen of catering industry, whether the exhaust is smooth is directly related to whether the kitchen can work normally. The purification of flue gas is only the mandatory function of purifying the air in the kitchen exhaust system. The reasonable matching of exhaust system and purifier is the key to ensure the purification efficiency of dust purifier, and it is also a problem easy to ignore the design of dust purifier. If the exhaust system is not designed properly, the whole kitchen will not run out. Even if the fume purifier is installed, the fume purifier cannot be installed.
排烟罩由盖体和盖子的上部和下部组成。盖体由三个平面组成，盖子由前，后，左，右四个平面(或挡板)组成，形成一个圆锥体。锥体的下端与盖体连接，上端与抽油烟机连接，活动挡板在盖体两侧或靠近窗口的盖子上打开，前挡板有凹口美观精致，油烟完全耗尽，污染不污染。环境，排烟罩厂家对人体健康有益，结构简单，成本低。
The smoke exhaust hood is composed of a cover body and the upper and lower parts of the cover. The cover body is composed of three planes, and the cover is composed of front, back, left and right planes (or baffles), forming a cone. The lower end of the cone is connected with the cover body, and the upper end is connected with the range hood. The movable baffle plate is opened on both sides of the cover body or on the cover close to the window. The front baffle plate has a notch, which is beautiful and exquisite, and the range hood is completely exhausted without pollution. The smoke hood factory is beneficial to human health, with simple structure and low cost.
油烟机要安在背风的一面墙下。跟前没有大风吹过，风不会回灌。保证油烟顺利被吸走。
First of all, the range hood should be installed under a leeward wall. There is no strong wind in front of us, and the wind will not recharge. Ensure that the lampblack is sucked away smoothly.
要给油烟机下面装一个灶柜，这样油烟直接就被吸上去了。
We should install a kitchen cabinet under the range hood, so that the lampblack can be directly sucked up.
油烟机的位置要离窗户近，这样安装的通风管道会更短，能更快地排出室内。
The position of the range hood should be close to the window, so that the installed ventilation pipe will be shorter and the indoor air can be discharged faster.
管道从油烟机到排风口的管道要平直或稍微上扬，不要往下降方向走，保证风的走势顺畅。
The pipeline from the range hood to the exhaust outlet should be straight or slightly upward, not downward, to ensure the smooth trend of the wind.
塑料管道一定要尽可能粗，排风量才大。
The plastic pipe must be as thick as possible, so that the exhaust air volume is large.
因为是塑料管道，排烟时很容易摇晃，更好用绳子绑住管道，挂在房顶上，一是承受一部分管道的重量，二是帮助稳定管道不致来回晃。
Because it's a plastic pipe, it's easy to shake when exhausting smoke. It's better to tie the pipe with a rope and hang it on the roof. On the one hand, it can bear part of the weight of the pipe, and on the other hand, it can help stabilize the pipe from shaking back and forth.
济南排烟罩
Jinan smoke hood
为了防止露在室外的管道进入小鸟或飞虫，在管道口安上一个用纱布围起来的布兜，排烟时，布兜自动撑开，不排烟时，布兜就落下去，挡住了风口。只要这些小细节上注意了，排烟效果就明显增强了。
In order to prevent the pipe exposed outdoors from entering birds or flying insects, a cloth bag surrounded by gauze is installed at the pipe mouth. The cloth bag will open automatically when smoke exhausts. When no smoke exhausts, the cloth bag will fall down and block the air outlet. As long as these small details are paid attention to, the smoke exhaust effect will be significantly enhanced.
以上就是对济南排烟罩的设计方法的介绍，大家都清楚了吗?相信通过本文的描述，你能有所收获，希望以上内容能帮助到你。
The above is the introduction of the design method of Jinan smoke hood, are you clear? I believe that through the description of this article, you can gain, I hope the above content can help you.
上一篇：通风管道加工对于人们生活有多重要？
下一篇：通风管道安装加工应注意的问题有哪些?
