近年来，随着人们生活水平的不断提高，人们的健康意识越来越高，通风管道走进了办公大楼，成为人们日常生活中必不可少的一部分。通风设备的畅销推动了通风设备技术的发展，使得通风设备的安装技术越来越好。
In recent years, with the continuous improvement of people's living standards, people's health awareness is getting higher and higher. The ventilation pipe has entered the office building and become an indispensable part of people's daily life. The popularity of ventilation equipment promotes the development of ventilation equipment technology, making the installation technology of ventilation equipment better and better.
然而，不可避免的，厂房通风管道在安装时会出现破损问题，那今天我们西安通风管道加工厂家小编就给大家介绍一下怎样解决厂房通风管道破损的问题：
However, it is inevitable that the ventilation pipes in the workshop will be damaged during the installation. Today, we Xiaobian, the ventilation pipe processing factory in Xi'an, will introduce how to solve the problem of damaged ventilation pipes in the workshop
山东通风管道加工
shandong ventilation pipe processing
如果在管道外就用专用的密封胶就可以修补，管道外表面的铝箔层发生破损，而玻纤保温层未发生损坏，则可选用一片合格的铝箔片进行管道铝箔表面的修补。
If the special sealant can be used outside the pipe, and the aluminum foil layer on the outer surface of the pipe is damaged, but the glass fiber insulation layer is not damaged, a qualified aluminum foil can be selected to repair the aluminum foil surface of the pipe.
如果在通风设备安装时发现破损已达到玻纤保温层时，则可将破损的地方切割下来，济南通风管道加工厂家发现另选一块完好的板材，根据切割下来的玻板尺寸切割好，然后在四周接口上涂上修补胶及粘胶剂，根据工艺规范进行密封，在通风设备正常工作时就要经常检查以免耽误工作。
If it is found that the damage has reached the glass fiber insulation layer during the installation of ventilation equipment, the damaged place can be cut down. Jinan ventilation pipeline processing factory finds that another intact plate is selected, which is cut according to the size of the cut glass plate, and then the repair glue and adhesive are applied on the surrounding interface, and the sealing is carried out according to the process specification, so that the ventilation equipment will be sealed when it works normally Check regularly to avoid delay in work.
上一篇：如何区别通风管道与保温风管？
下一篇：通风管道加工前需注意的情况
