专注通风管道加工·排烟罩

食堂油烟机排烟罩其特征在于由罩体和罩盖上下两部分构成，罩体由三个平面组成，罩盖由前、后、左、右四个平面（或称挡板）构成一个锥体/其锥体的下端与罩体相连，上端与抽油烟机相连，活动挡板开在罩体或罩盖靠近窗户的任意一面，前挡板带有缺口。

The smoke exhaust hood of the canteen range hood is characterized in that it is composed of the hood body and the upper and lower parts of the hood. The hood body is composed of three planes. The hood is composed of four planes (or baffles) front, rear, left and right. The lower end of the cone is connected with the hood body, and the upper end is connected with the range hood. The movable baffle is opened on either side of the hood body or the hood close to the window. The front baffle has a gap.

广泛用于宾馆、酒店、学校、单位食堂、大型等。饭店厨房排烟罩采用不锈钢拉丝工艺，不仅外表美观，还能防腐防锈。饭店厨房排烟罩吸烟内腔采用大空间设计使得油烟杂质的吸收变得更充分，更彻底更强油烟吸收率应大于95%。

It is widely used in star hotels, hotels, schools, canteens and large supermarkets. The smoke exhaust hood of the hotel kitchen adopts high-quality stainless steel wire drawing technology, which not only has a beautiful appearance, but also can prevent corrosion and rust. The large space design is adopted in the smoking chamber of the smoke exhaust hood in the hotel kitchen to make the absorption of oil smoke impurities more complete and stronger. The absorption rate of oil smoke should be greater than 95%.

1.油网烟罩后封板、前封板、前页、上滑槽与下滑槽所有外露边均压扣边；

1. all exposed edges of the rear sealing plate, front sealing plate, front page, upper chute and sliding chute of the oil screen hood shall be crimped;

2.油网烟罩后封板与前封板连接为分段短焊，其中前封板HL面外露；

2. the connection between the rear sealing plate of the oil screen hood and the front sealing plate is a segmental short welding, in which the HL surface of the front sealing plate is exposed;

3.油网烟罩前页与油网烟罩前封板连接为分段短焊，焊接面在前封板外露面前页HL面向下，二端烟罩连接口分别向上90度；

3. the connection between the front page of the oil screen hood and the front sealing plate of the oil screen hood is a segmented short welding. The welding surface is facing downward on the front page HL of the exposed surface of the front sealing plate, and the connecting ports of the two end hoods are 90 degrees upward respectively;

4.油网烟罩二末端的油烟网罩侧封板与后封板、前封板前页为分段短焊，其中同前页的前端（注：尺寸120mm）、后封板去油槽位置为满焊并打磨；

4. the side sealing plate of the oil fume hood at the two ends of the oil fume hood, the rear sealing plate and the front page of the front sealing plate are short welded in sections, of which the front end (Note: size 120mm) is the same as the front page, and the oil removal groove of the rear sealing plate is fully welded and polished;

5.济南排烟罩厂家提醒，烟罩照明灯必须有防水功能，导电线要有转悠穿线护管。

5. the manufacturer of Jinan smoke hood reminds that the smoke hood lamp must have waterproof function, and the conducting wire must have a wandering threading protective tube.

食堂油烟机排烟罩的特征及制作要求便是这样了，您可以来我们网站www.1nightescorts.com咨询了解更多事项，以便于后期的顺利使用。

The features and manufacturing requirements of smoke exhaust hood of canteen range hood are as follows. You can visit our website at www.jnqsg Com for more information, so as to facilitate the smooth use in the later stage.