通风管道是一种市政基础设施，可以保持室内空气流通，减少有害气体。它们是空调系统的重要组成部分。风管是由风管加工设备制作的，但是在风管加工过程中会出现很多问题，比如说翘曲、弯曲以及处理数据不达标问题，下面来讲讲有关内容吧。
Ventilation duct is a kind of municipal infrastructure, which can maintain indoor air circulation and reduce harmful gases. They are an important part of the air conditioning system. The air duct is made by the air duct processing equipment, but there will be many problems in the process of air duct processing, such as warping, bending and the problem of processing data not up to standard. Let's talk about the relevant content below.
1、严禁翘曲、弯曲风管
1. Warping and bending of air ducts are strictly prohibited
原因：面板排列时，风道成对平行，相对面板的长宽不相等。
Reason: when the panels are arranged, the air ducts are parallel in pairs, and the length and width of the relative panels are not equal.
步骤：开料时，应将板材的角部连接起来，并检查每张板材的长度、宽度和对角线，使误差在允许范围内；下料后，风管对面的两片应重叠，检查尺寸精度。
Step: when cutting, connect the corners of the plates, and check the length, width and diagonal of each plate to make the error within the allowable range; After blanking, the two pieces opposite the air duct should be overlapped to check the dimensional accuracy.
表示两对矩形风道是三维的，两端面不平行；折角不直；对角线没有严格咬合。
Indicates that the two pairs of rectangular air ducts are three-dimensional, and the two ends are not parallel; The angle is not straight; Diagonal is not strictly occluded.
影响：会造成风管受力不均，安装后风管不均匀，法兰垫片松动，系统漏风，造成空调负荷损失，延长使用寿命。
Impact: it will cause uneven stress on the air duct, uneven air duct after installation, loose flange gasket, air leakage of the system, resulting in air conditioning load loss and extended service life.
2.处理数据不达标
2. The processing data is not up to standard
原因：资料不合格，各工序风管制造要求不严格。
Cause: the data are unqualified, and the manufacturing requirements of air duct in each process are not strict.
步骤：在使用通风管加工设备制造风管之前，需要对工厂合格证、数据质量确认、表面厚度等数据进行反思。确保数据可用性。
Step: before using the ventilation pipe processing equipment to manufacture the ventilation pipe, it is necessary to reflect on the factory certificate, data quality confirmation, surface thickness and other data. Ensure data availability.
板外不平整，厚度不均，有明显的压痕、裂纹、起泡、伤痕、锈蚀等环境；风道在三维空间下沉，前端向外凸出，变形明显。
The outside of the board is uneven, uneven in thickness, and there are obvious indentation, crack, blister, scar, rust and other environments; The air duct sinks in three-dimensional space, the front end protrudes outward, and the deformation is obvious.
影响：
山东通风管道加工人员提醒，运行时风管泄漏，空调负荷增大，影响风的寿命和性能。
Impact: Shandong ventilation duct processing personnel reminded that the air duct leakage during operation, the air conditioning load increases, affecting the life and performance of the air.
Through the above article, you can clearly understand the content of the problem. I believe that after reading this article, you can have a more in-depth understanding of the product and the matter. In the future, if you want to know more relevant knowledge, you can continue to pay attention to our official website http://www.1nightescorts.com , please feel free to contact us if you need anything.
上一篇：通风管道加工过程中可能会出现的管道问题
下一篇：安装在室外的油烟净化器要如何保养
