通风管道大家应该并不陌生，能够很好的保证空气流畅，降低有害浓度，铁质通风管道设备主要是有通风管道生产设备厂家生产完成的，一般来说用于电子厂房的通风，酒店宾馆，还有食品无菌车间等需要进行空气跟新的地方的空调系统。那么怎么样针对通风管道连接技术要点提高工作效率呢？以下
山东通风管道加工厂家为您介绍下。
Ventilation ducts should be familiar to everyone. They can ensure smooth air flow and reduce harmful concentration. Iron ventilation ducts are mainly produced by ventilation duct manufacturers. Generally speaking, they are used for ventilation of electronic plants, hotels, food aseptic workshops and other places that need new air conditioning systems. So how to improve the working efficiency according to the key points of ventilation pipe connection technology? The following is the introduction of Shandong ventilation pipe processing factory.
1、通风管道生产线厂家表示，一般对于玻璃通风管道来说，其连接采用的都是法兰连接，而对于塑胶通风管道来说，采用焊接的方式比较多。
1. According to the manufacturer of ventilation pipe production line, generally for glass ventilation pipes, flange connection is adopted, while for plastic ventilation pipes, welding is adopted more often.
2、为了让通风管道的密封性效果不会在连接处出现问题，可以在每个分管的端口之间垫上衬垫。
2. In order to ensure that the sealing effect of the ventilation pipe will not occur at the connection, a gasket can be placed between the ports of each branch pipe.
3、如果通风管道口径比较大，通常在工作的时候管道振动会发出很大的噪音。为了解决这一问题，通风管道需要进行再加固，这样通风管道在使用的时候发出的噪音就没有那么大。
3. If the diameter of the ventilation pipe is large, the pipe vibration will make a lot of noise when working. In order to solve this problem, the ventilation duct needs to be reinforced again, so that the noise generated by the ventilation duct during use is not so large.
4、通风管道的密封效果除了在每段通风管道端口处放衬垫外，还可以借助板材的连接来改善。
4. The sealing effect of the ventilation duct can be improved by the connection of plates in addition to placing gaskets at the ends of each section of the ventilation duct.
为了让连接处密封性和牢固性更强，可以使用蜂蜜胶将缝隙粘合起来。通风管道展开步骤基本上可以分为熟悉图形，形体分析，求直线的实长或平面的实形，确定展开方法和画展开图这几个部分。
In order to make the sealing and firmness of the joint stronger, the gap can be bonded with honey glue. The unfolding steps of the ventilation duct can basically be divided into familiar graphics, shape analysis, finding the real length of the straight line or the real shape of the plane, determining the unfolding method and drawing the unfolding diagram.
在进行展开下料前，先要熟悉施工图纸，这是一项准备工作，主要是对将要展开的关键和部件有所了解，如管道在图纸上的尺寸大小、制作材料等。而对于比较复杂的管件则需要对施工图纸进行反复阅读和分析，针对有关问题要及时提出和解决。
Before unfolding and blanking, it is necessary to be familiar with the construction drawings. This is a preparatory work, mainly to understand the key and components to be unfolded, such as the size of the pipeline on the drawings and the manufacturing materials. For more complicated pipe fittings, it is necessary to repeatedly read and analyze the construction drawings, and timely put forward and solve relevant problems.
Since the ventilation duct parts and their components are geometric figures on the drawings, the main purpose of analyzing the shape is to simplify the complex geometric figures. Through analysis, in order to find the appropriate expansion method. For more information, please visit our website http://www.1nightescorts.com Consult and understand.
上一篇：饭店油烟机排烟罩的制作安装与养护
下一篇：通风管道加工的相关知识介绍
