专注通风管道加工·排烟罩

The correct installation of kitchen exhaust ducts is crucial for maintaining fresh kitchen air and effectively eliminating smoke and oil fumes. The following are the general steps for installing kitchen exhaust ducts:

规划和设计：

Planning and Design:

在安装排烟管道之前，需要进行规划和设计，确定管道的走向和位置。考虑厨房布局、烟机位置和出口位置等因素，确保排烟管道的布置合理。

Before installing smoke exhaust ducts, planning and design are necessary to determine the direction and location of the ducts. Consider factors such as kitchen layout, fan position, and outlet position to ensure the reasonable layout of smoke exhaust ducts.

准备材料和工具：

Prepare materials and tools:

根据设计要求和管道尺寸，准备所需的排烟管道材料，如镀锌钢管、铝管等。同时，准备安装所需的工具，如切割工具、螺丝刀、螺丝扳手等。

According to the design requirements and pipeline size, prepare the necessary smoke exhaust pipeline materials, such as galvanized steel pipes, aluminum pipes, etc. At the same time, prepare the necessary tools for installation, such as cutting tools, screwdrivers, screw wrenches, etc.

安装烟机：

Installation of smoke hood:

安装烟机是排烟管道安装的步。将烟机固定在厨房墙壁或吊顶上，并根据烟机的出口位置和尺寸确定排烟管道的起始点。

Installing the smoke exhaust fan is the first step in installing the smoke exhaust duct. Fix the smoke exhaust fan on the kitchen wall or ceiling, and determine the starting point of the smoke exhaust pipeline based on the outlet position and size of the smoke exhaust fan.

安装排烟管道：

Install smoke exhaust ducts:

切割管道：根据设计要求和实际情况，使用适当的工具将排烟管道切割成所需的长度和形状。

Cutting pipes: According to the design requirements and actual situation, use appropriate tools to cut the smoke exhaust pipes into the required length and shape.

连接管道：使用合适的连接件（如弯头、接头等）将排烟管道连接起来，确保连接紧密，并使用螺丝或螺母进行固定。

Connecting pipes: Connect smoke exhaust pipes with suitable connectors (such as elbows, joints, etc.) to ensure tight connections and secure them with screws or nuts.

固定管道：将排烟管道固定在墙壁、吊顶或天花板上，确保管道稳固且不会晃动。

Fixed pipeline: Fix the smoke exhaust pipeline to the wall, ceiling or ceiling to ensure that the pipeline is stable and does not shake.

安装排烟出口：

Install smoke exhaust outlet:

安装排烟出口是确保排烟管道能够有效排出烟雾和油烟的关键步骤。根据设计要求，安装合适的排烟出口，如排烟风帽或排烟口，确保其与管道连接紧密且密封良好。

Installing smoke exhaust outlets is a key step in ensuring that smoke exhaust ducts can effectively exhaust smoke and oil fumes. According to the design requirements, install suitable smoke exhaust outlets, such as smoke exhaust hoods or smoke exhaust outlets, to ensure that they are tightly connected to the pipeline and well sealed.

检查和测试：

Inspection and testing:

在完成安装后，进行排烟系统的检查和测试。确保排烟管道连接牢固、无泄漏，并进行排烟系统的测试，检查是否正常运行，有效排除烟雾和油烟。

After completing the installation, inspect and test the smoke exhaust system. Ensure that the smoke exhaust pipes are securely connected and leak free, and conduct testing of the smoke exhaust system to check for normal operation and effectively eliminate smoke and oil fumes.

需要注意的是，在安装排烟管道时应遵守相关的规范和建筑标准，确保管道安装牢固、排烟效果良好，并确保使用合适的材料和配件。

It should be noted that when installing smoke exhaust pipes, relevant safety regulations and building standards should be followed to ensure that the pipes are firmly installed, the smoke exhaust effect is good, and appropriate materials and accessories should be used.