1、每个炉灶(每米烟罩)对应的处理风量约为2000m3/h,根据炉灶数量(烟罩长度)及安装位置确定总的处理风量并选定相应净化器的规格型号;
1. The corresponding processing air volume for each stove (per meter of hood) is about 2000m3/h. The total processing air volume is determined based on the number of stoves (hood length) and installation location, and the corresponding specifications and models of the purifier are selected;
2、选择相匹配的风机风量,风机的风量选择一般比净化器的处理风量不能大于5%,(此数据仅供参考,具体由工程商按现场情况而定,如果风机的风量选择过大于净化器 的*大处理风量时会影响净化器的净化效果) ;
2. Choose a matching fan air volume, and the fan air volume should generally not exceed 5% of the purification air volume of the purifier. (This data is for reference only, and the specific situation will be determined by the engineering company according to the on-site situation. If the fan air volume is selected to be too large than the purification air volume of the purifier, it will affect the purification effect of the purifier.);
3、安装净化器与烟罩出口位置的距离少3米以上,以确保消防和净化效果;净化器与风机的距离2米以上比较合适;
3. Install a purifier at least 3 meters away from the outlet of the hood to ensure fire safety and purification efficiency; A distance of more than 2 meters between the purifier and the fan is more suitable;
4、机器在安装前*好先通电试行一段时间,检验机器的电极是否会在运输或搬运中产生偏移;
4. Before installation, the machine should be powered on and tested for a period of time to check if the electrodes of the machine will shift during transportation or handling;
5、机器的进出风口可以随意互换,进风口方向必须要有过滤网;
5. The air inlet and outlet of the machine can be interchanged freely, and the direction of the air inlet must have a filter screen;
6、接好排油管;
6. Connect the oil drain pipe properly;
7、启动净化器之前必须先启动风机运10分钟(特别是在严寒的冬天,风机先启动的时间应该更一点),关机时应先关掉净化器后再停风机。
7. Before starting the purifier, the fan must be started for 10 minutes (especially in severe winter when the fan should be started earlier). When shutting down, the purifier should be turned off before stopping the fan.
This article is a friendly contribution from Jinan Oil Fume Purifier. For more information, please click on: http://www.1nightescorts.com Sincere attitude. We will provide you with comprehensive services. We will gradually contribute more relevant knowledge to everyone. Stay tuned
上一篇:通风管道加工焊接注意事项
下一篇: 济南厨房排烟管道设计标准